11-Month Warranty Inspection: The Builder Deadline Most New Homeowners Miss

You’ve settled into your new Oklahoma home, learned which light switch does what, and made it through changing seasons. Then a small drywall crack appears, a door starts sticking, or you notice water sitting near the foundation after a storm. These things can be easy to put off, until you realize your builder’s one-year warranty may be close to ending.
An 11 month warranty inspection gives you an organized, written record of visible concerns while your builder’s warranty may still be active. It doesn’t guarantee the builder will cover every finding, but it can help you raise specific issues before the deadline and understand what deserves attention.
Check your warranty before the year is up.
Many builders offer a one-year workmanship warranty, but coverage, exclusions, notice requirements, and deadlines depend on your own warranty documents. Some warranty programs require the builder to receive a written notice before coverage ends. Read your agreement and follow its instructions carefully.
For example, the Oklahoma State Home Builders Association warranty document describes a one-year period for certain materials and workmanship issues and outlines written notice requirements. It is only an example, not a substitute for your builder’s warranty. Check your own documents for the exact start date, submission method, and claim deadline.
Schedule your inspection around month 11, with enough time left to review the report and submit any concerns. Don’t assume a phone call, builder visit, or open work order automatically extends your deadline.
Why an independent inspection helps
A new home can still develop workmanship concerns or reveal conditions that weren’t apparent at the final walkthrough. A year of everyday use, heating and cooling, rain, and seasonal changes gives you more information about how the home is performing.
An independent new construction home inspection is usually conducted before closing. An 11-month warranty inspection is a later review, after you have lived in the home. It helps document visible conditions at that time so you can make informed decisions about what to discuss with your builder.
The inspection does not decide whether a defect is covered, require a builder to act, or guarantee repairs at no cost. Your warranty terms and the builder’s response determine that. The inspection provides clear observations and documentation to support your next conversation.
Look closely at Oklahoma soil and drainage.

Oklahoma red dirt can contain expansive clay that swells when wet and shrinks as it dries. Those changes in soil moisture can contribute to movement around a foundation. That doesn’t mean every crack points to a serious problem, but it does make drainage and changes around the home worth checking.
A warranty inspection can document visible conditions such as:
- Soil that slopes toward the home or holds water near the foundation
- Downspouts that discharge beside the house, erode soil, or drain toward the home
- Gaps or settlement around the foundation, porch, sidewalk, or driveway
- Visible foundation or masonry cracks, uneven floors, and related sticking doors
- Water staining or signs of moisture in accessible areas
Your inspector can record what is visible, but a general home inspection does not diagnose the cause or determine whether foundation movement is active. If findings suggest a significant structural concern, you may need an evaluation by a qualified structural engineer or other appropriate specialist.
Take a moment to look at where water flows after a rain. The Oklahoma State University Extension guide to residential downspouts offers practical information about directing runoff. Ask your builder about any concerns before changing grading or drainage in a way that could affect your warranty.
Review the roof, exterior, and gutters.
Oklahoma’s hail-prone weather makes the roof and exterior important parts of a careful review. An inspector checks visible, safely accessible areas for conditions such as damaged or poorly installed roofing materials, flashing concerns, and signs of water entry. The inspection can also note visible concerns around siding, trim, windows, exterior penetrations, soffits, and fascia.
Gutters and downspouts matter because they carry roof water away from the house. Oklahoma homes commonly use 5-inch aluminum gutters, rather than plastic gutters, in part because of hail exposure. An inspection can document visible damage, loose connections, blockages, or downspouts that discharge too close to the foundation.

Check the details you use every day.
Some findings are small but worth listing clearly. Inside, an inspector may document nail pops, drywall cracks, gaps in trim, or finishes that have shifted. These can occur as a home settles, but their location and pattern help you describe the concern to your builder.
Doors and windows should open, close, latch, and seal as intended. Note any that stick, rub, won’t lock properly, or allow noticeable drafts. Such symptoms can have different causes, so they are observations to document, not a diagnosis on their own.
A thorough review also includes the major systems and accessible components. Depending on access and conditions, this may include:
- Plumbing: visible leaks, drainage, fixtures, and water-heater concerns
- HVAC: operation of the home’s standard outdoor central AC condenser and heating system, along with visible concerns at accessible equipment
- Electrical: visible safety concerns, outlets, switches, and accessible electrical components
- Attic, structure, and interior: safely accessible areas, visible moisture clues, and other conditions that merit attention
The inspection is visual and non-invasive. It does not include opening walls or taking apart equipment, and a system’s performance can depend on weather and operating conditions during the appointment.
Turn findings into a clear written request.

A detailed report helps you describe what was observed and where. When you contact your builder, follow the process in your warranty and provide specific information. For example, “water is visible under the kitchen sink when the faucet runs” is more useful than “plumbing issue.”
Before the deadline:
- Read your warranty. Confirm dates, coverage, exclusions, and how to submit a claim.
- Keep a simple record. Note when you noticed each concern and save relevant photos or messages.
- Review your inspection report. Identify the findings you want to bring to the builder’s attention.
- Submit concerns in writing. Use the method and timing your warranty requires, and keep a copy.
- Ask for confirmation. Request a written response or next steps from the builder.
Arrowhead Home Inspections inspects and documents conditions; we do not perform repairs or decide which items your builder must cover. Your written warranty controls coverage, and questions about your contractual rights may require advice from a qualified professional.
Get clear information before the deadline.
Arrowhead Home Inspections’ 11-month warranty inspection is a comprehensive visual review of your home’s major structures, systems, and safely accessible components. Edward Hagstrom is a Certified Master Inspector (InterNACHI) and a retired U.S. Air Force First Sergeant with more than 30 years of inspection experience across military and Department of Defense work.
The goal is practical: careful observations, clear documentation, and explanations that help you understand what was found and what questions to ask. You can preview the format with our sample inspection report, then schedule your inspection or call (405) 210-8452.
A few weeks of planning now can make it easier to review your home and communicate with your builder while the warranty window is still open.
Inspected Once, Inspected Right!
